3-1-4. change password, 3-2. port / trunk configuration – TRENDnet TEG-S081FMI User Manual
Page 21

4-3-1-4. Change Password
Use this page; user can change web management user password.
The default password is root
4-3-2. Port / Trunk Configuration
This page can change every port status and configure trunk group.
Press TAB key to change configure of per item.
1.Enabled: User can disable or enable this port control, but port 9 always is
enabled, can’t be disable.
2.Auto Negotiate: port 1 to 8 (100Mbps Fiber) is disabled, port 9 ( GBIC port)
is enabled.
3.Speed/Duplex Config: For port 1 to 8 ( 100 Mbps Fiber port)only can set
Full or Half duplex , Port 9 ( GBIC port ) support 1000Mbps Full Duplex.
4.Flow Control: User can set flow control function is enable or disable(only
for port 1 to 8), port 9(GBIC port) always support flow control.
5.Group: User can set trunk group for port1~prot8. There are four trunk
groups to provided configure. Port 9 is not available for Trunk.
21