Tripp Lite UPS SNMPWEBCARD - Manual (Page 9)

Chapter 4 Browser Interface
You may monitor and control a UPS system with an SNMPWEBCARD using an Internet browser. The card generates navigable
HTML pages. These HTML pages are updated to match UPS status every 30 seconds; the browser will refresh the displayed
information automatically. To update the information on a page sooner, reload the page.
Establishing a Connection
To connect to the SNMPWEBCARD:
1. Start your browser.
2. In the Address field, enter http://IP_Address (where IP_Address is the IP Address of the SNMPWEBCARD, e.g.
http://192.168.1.1).
3. The Log On Page will appear.
To Log On to the UPS Adapter
To log on and continue to the SNMPWEBCARD’s other Web pages:
1. If you have not configured the SNMPWEBCARD to require a user name or password for access, hit the Submit Logon
button to continue.
2. If the card is configured to require a user name and/or password for access, enter them here before hitting the Submit
Logon button to continue.
(Note: Default user names are guest with no password and admin with no password.)
Navigating the SNMPWEBCARD Web Pages
The logon default screen is the Status Screen. (See Figure 4-1.) This screen is divided in to four sections:
1) Menu Bar
2) Device Information
3) Device Summary
4) Alarm Status
7