Toshiba Starta DK Digital Telephone - Manual (Page 96)

84
Strata DK Digital Telephone 5/99
LCD Operation
Caller ID/ANI/DNIS Information Mode
Caller ID/ANI/DNIS Information Mode
Automatic Number Identification (ANI) information cannot co-exist on the same telephone
LCD with Dialed Number Identification Service (DNIS) information. If your system is
programmed to receive both ANI and DNIS information on incoming calls, press
3DJH while
the call is ringing to alternate between DNIS and ANI/Caller ID LCD displays. After you
answer the call, you can not alternate between displays.
DNIS
Incoming DNIS telephone numbers can be correlated in the system database with assigned
DNIS names. These names, up to 16 alphanumeric characters, display on your telephone’s
LCD, enabling incoming calls to be instantly identified and appropriately answered.
Table 10
shows DNIS samples.
ANI/Caller ID
If your telephone is programmed to receive Caller ID names and numbers, the calling party’s
name displays.
Table 10 shows ANI samples. If Caller ID was activated, then the caller’s name
and/or number would appear on the first line.
➤
To display the number while the call is ringing
➤
To activate the Caller ID/ANI or DNIS display mode
➤ Press
0RGH
+ . (The system default is ON.)
➤
To deactivate the Caller ID/ANI or DNIS display mode
➤ Press
0RGH
+ .
➤ While the call is
ringing, press
3DJH
.
MR. JONES
LINE
3 RINGING