Speed dial—advanced features, Feature access codes – Toshiba Starta DK Digital Telephone User Manual
Page 74
62
Strata DK Digital Telephone
5/99
Features
Speed Dial—Advanced Features
Speed Dial—Advanced Features
Feature Access Codes
You can program
6'
(Speed Dial) buttons with feature access codes for a single feature or a
sequence of features as long as the keyed dial pad characters do not exceed 20 digits. To
determine how many digits you have, count 2 digits for
&QI7UQ
, [PDN] and
+ROG
feature
buttons and 1 digit for all other dial pad characters.
See
for a list of feature access codes.Your System Administrator can tell you which
features can be programmed on your telephone.
➤
To store a feature onto a
6'
button
➤
5HGLDO
+
6'
+ Feature Access Code +
5HGLDO
.
♦
See
for Feature Access code sequences.
♦
6'
= the speed dial button the feature is stored on.
➤
To store a feature onto a code
➤
5HGLDO
+
6SHHG 'LDO
+ Speed Dial Access Code + Feature Access Code +
5HGLDO
.
Important!
●
Do not lift the handset.
●
If you do not enter the entire sequence within a specified time (set in system programming
for either one or three minutes), the operation times out and your telephone returns to idle
mode.
●
If your telephone does not have a
6SHHG 'LDO
, press “
” instead of Speed Dial, and enter
instead of in all feature sequences
●
[PDNs] can be stored in speed dial sequences but [PhDNs] and [SDNs] cannot.