Toshiba Starta DK Digital Telephone User Manual
Page 16
4
Strata DK Digital Telephone
5/99
The Grand Tour
Buttons
+ROG
(continued)
If the held party hangs up, the call is released and the CO provides a hold-
release signal.
Note
If your telephone is programmed for Automatic Hold, existing calls are
automatically placed on hold when you answer a call or make another
call. (See
A different call can be held on each [DN] or
/LQH
button on your phone. Each time you press
6FUROO
,
a different [DN] or
/LQH
is selected. The selected
button’s LED flashes rapidly and your LCD displays
information for the call holding on that button
(samples shown at right).
0LF
(Microphone)
➤
Press to toggle the microphone ON/OFF while the telephone is in use. The
LED indicates the status of the microphone.
Notes
♦
The microphone and accompanying LED are always ON when receiving
“voice first” internal [DN] calls to enable Handsfree Answerback and OFF if
you receive a ring-first call. Mic may be ON/OFF when placing an on-hook
CO line or internal [DN] call.
♦
Each station’s Mic can be set in system programming to switch ON/OFF
with one touch, to switch OFF only while pressed and held, or to be either
ON/OFF at the start of handsfree dialing.
♦
To talkback to an HS-OCA call, press and hold Mic and talk over your
telephone handset/headset. The LED and microphone remain OFF during
OCA talkback operation (see
♦
Mic functions on Handsfree Answerback and OCA calls for privacy.
0VJ
(Message)
➤
When Msg LED flashes, press
0VJ
to call back the station or voice mail
device that activated the LED (see
). This is
the telephone’s [PDN] message waiting button.
5HGLDO
➤
Press the same [DN] or
/LQH
that you used to dial the original number.
Press
5HGLDO
. The last number called is redialed.
Note
If you have Automatic Line Selection, you must first lift the handset.
Table 1
Fixed Button Definitions
(Continued)
Button
Definitions
CO LINE 02
HOLD
DN
202
HOLD