Soft key display, How to use soft keys, Soft key display how to use soft keys – Toshiba Starta DK Digital Telephone User Manual
Page 92
80
Strata DK Digital Telephone
5/99
LCD Operation
Soft Keys
Soft Key Display
Abbreviated Soft Key feature prompts display on the LCD above the
Control buttons (
0RGH
,
3DJH
, and
6FUROO
). In the following
example, you would press
0RGH
for the
TRNS
function,
3DJH
for
CONF
and
6FUROO
for
PGE
.
If the Soft Key feature is activated at your station, incoming call information does not display
on your LCD while your station is busy. To display this information, you must either
disconnect the existing call or place it on hold.
How to Use Soft Keys
This section provides an example of how to use Soft Keys to make a Conference call by
adding a station to an outside call. See
for a list of features
that can be accessed with Soft Keys.
Example: Using Soft Keys to Make a Conference Call
While on an outside call (
LINE 3
) you initiated, your LCD displays the
prompts
ABR
,
CONF
, and
PGE
during the first 30 seconds (if
ABR
does
not appear, then this feature was not assigned in system
programming).
Thirty seconds after the first digit of the telephone number is dialed,
the display changes to
TRNS
,
CONF
, and
PGE
. If the call is an
incoming call, the
TRNS
prompt appears immediately when you
answer the call.
➤
To Use Soft Keys to Make a Conference Calll
1. While on an outside
call, press
CONF
(
3DJH
) to initiate the
Conference.
The outside call is placed on-hold.
(Optional) You can
press
RTRN
(
6FUROO
)
to terminate the
operation and return
to the outside call.
TALK ON LINE 2
TRNS CONF PGE
TALK ON LINE 3
ABR CONF PGE
TALK ON LINE 3
TRNS CONF PGE
LINE OR STATION?
LINE STA. RTRN