Toshiba Starta DK Digital Telephone - Manual (Page 49)

Features
Conference Calls
Strata DK Digital Telephone 5/99
37
➤ To answer a waiting call by disconnecting or transferring the current call
Conference Calls
This feature enables you to add other parties to an existing call. (If you have an LCD
telephone, you can use Soft Keys to make a conference call.) The following conferencing
configurations are possible:
♦ up to two stations and two CO lines
♦ up to three stations and one CO line
♦ up to four stations
➤ To make a conference call
...or if your telephone
has the Auto Hold
feature, just press the
flashing [DN] or
/LQH .
You are connected to the transferred call. The [DN] or Line
LED flashes green (in-use).
Note See your System Administrator to find out if you have
Auto Hold.
➤ Hang up or transfer
the existing call; the
camped-on call rings
your station The existing call disconnects or transfers. The camped-on line
rings your telephone and the Line LED flashes green
(incoming call).
...or press the flashing
[DN] or
/LQH .
This disconnects the current call and connects you to the
transferred call. The [DN] or Line LED flashes green (in-use).
1. While on a call, press
&QI7UQ .
You hear dial tone and the [DN] or Line LED flashes green
(conference-rate).
2. Dial a [DN] or access
a CO line and dial the
telephone number.
3. When the called party
answers, press
&QI7UQ .
All parties are conferenced. If the second call was placed on a
[DN] or CO line that appears on your telephone, the LED also
flashes green at the in-use rate.