Toshiba Starta DK Digital Telephone - Manual (Page 105)

LCD Operation
Messages
Strata DK Digital Telephone 5/99
93
Message Notifications
With an LCD telephone, you can set short messages (up to 32 characters) that display to
callers with LCD telephones.
Any station can record a message; however, only stations with an LCD are able to see the
stored messages. Stations that do not use Soft Keys (Soft Keys Off:
0RGH + ) can send
messages “live” to other LCD station users.
Notification Station Messaging
Your station number and a message indication can be sent to another LCD station. When that
station responds, it will receive the message. Soft Keys must be OFF at the sending station for
this feature to operate.
➤
To set a notification station message
1. Press [PDN] and dial
the station Directory
Number (station does
not answer or is
busy).
2. Press 0RGH + .
3. Enter the message
number.
Station message (10~19), system message (60~99). The LCD
displays the message. (This assumes the message has already
been stored in memory.)
4. Press 0VJ .
5. Press
6SNU
or hang
up to release.
Msg LED flashes on the called station.
204 = the called [DN]
207 = the [PDN] of the station that
sent the message
M = message has been sent.
Called station
Your station
MW TO STXXX
MSG NO.?
CALL 204-207M
SENT 204