beautypg.com

Alert signaling, Attendant console calling, Alert signaling attendant console calling – Toshiba Starta DK Digital Telephone User Manual

Page 31

background image

Features

Alert Signaling

Strata DK Digital Telephone

5/99

19

Alert Signaling

Alert Signaling enables you to send an alert sound to a predesignated (partner) station by
pressing a single button. This feature is based on the “buzz” key, where, for example, a
manager might alert his/her administrative assistant to enter the office.

You can have as many as four

$OHUW 6LJQDO

(s) to send or receive an Alert Signal to/from

other telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or
in the DND or Call Forward mode.

To send an Alert Signal

Press

$OHUW 6LJQDO

. An alert tone sounds at the designated station.

Attendant Console Calling

Up to four Attendant Consoles can be installed per system. There can be up to three ways to
call the Attendant Console, depending upon system programming.

To call any attendant console

To call a specific console

To call all consoles for an emergency

Press a [DN] +

.

The call rings the Attendant Console’s

button. Dial

calls

rotate between the consoles if more than one console is installed.

Press a [DN] + the
console’s [DN].

The call rings the console’s

,Q'1

(incoming [DN] button). Your

System Administrator can provide the Attendant Console(s)

,Q'1

s.

Press a [DN] + the
emergency access
code

.

The call rings the

(PJU

button on all attendant consoles.