beautypg.com

Before using the appliance, Operating instructions – Binatone FS-404 D User Manual

Page 6

background image

6

19.Control panel
20.LCD
21.Water inlet
22.Power cord winding attachment

BEFORE USING

THE APPLIANCE

Carefully read this user’s manual.
Remove all packing materials from the appli-

ance.

Thoroughly wash food steamer, in particular,

the parts to be in contact with food (ref. to Main-
tenance and cleaning section).

Before switching on, check whether the voltage

indicated on the appliance complies with the voltage in your house-
hold.

OPERATING INSTRUCTIONS

Food steamer assembly and

operation

1. Install the food steamer base (16) on a rigid,
even heat-insulated surface near a socket and out
of children’s reach.

2. Install removable steam concentrator (13).
3. Fill the tank (14) with water taking note of the water level indica-

tor (17). 850 ml is enough for 1 hour of normal operation of the
food steamer.

Note

: Fill the reservoir (14) with cold tap water only. Do

not use other liquids or food dressings!

4. Install the steam condensing tank (12) on the water tank (14).
5. Put the food in the basket(s). When using several baskets, please

remember that foods that cook slowly should be placed in the lower
basket, while fast cooking foods – are placed in upper basket.

6. For cooking bulk and liquid products as well as products oozing

liquids during cooking, use the special rice cup (11) to be installed
in the steam basket.

7. Install the basket (5) on the steam condensing tank (12). When

using two tanks, put the upper basket (3) on the lower basket (5).
When using three baskets, install container (5) on the steam con-
densing tank (12), then put the middle container (4) on top, after
that - ring (10) and upper basket (3). For convenience of assem-
bly, there are installation marks, on the handles. The baskets are
numbered from top to bottom.

8. If the rice cup is used (11), put it into the upper basket.
9. Cover the upper basket with the lid (1).
10.Plug the appliance into the power. The symbols «00:00» will ap-

pear in the display (20). While this symbol is flashing, set the cur-
rent time by using buttons «+» and «-». Confirm the setting by press-
ing «0/I» button. To change time, switch the food steamer to the

This manual is related to the following products: