Technicolor - Thomson Network Router - Manual (Page 30)

Chapter 2: Networking
28 Chapter 2
MAC and IP Addresses Summary
This table summarizes all the MAC and IP addresses that may be associated with the TCP/IP
communication stacks and USB handling in your Wireless Cable Gateway. The ones actually
used depend upon your gateway Operating Mode, as explained above. At minimum, your cable
company will need to know the MAC address associated with IP Stack 1, which is the MAC
address shown on the modem label.
Purpose - Mode MAC Address
IP Address Stack Name
IP Stack 1
IP Stack 2
IP Stack 3
IP Stack 4
CM WAN access - all Modes
local management - CM Mode
only
per label on CM
CM label + 1
assigned by cable company
during initialization
CableHome remote management
- CH Mode only CM label + 2
CM label + 3
fi xed at 192.168.100.1
assigned by cable company
assigned by cable company
IP Stack 5
---
end-user remote management,
LAN WAN access -
RG Mode only
WAN data access -
CH Mode only CM label + 4 fi xed at 192.168.0.1
USB MAC
local management -
RG, CH Modes only
LAN gateway
CM label + 5
MAC and IP Addresses
DCW725 book file.indb 28 DCW725 book file.indb 28 10/6/04 11:17:25 AM 10/6/04 11:17:25 AM