SENAO EnGenius EP-801 - Manual (Page 32)

~63~
Technical Specifications
Electrical Specifications Base Station Portable Handset
Frequency 863-865 MHz 863-865 MHz
Peak: 8 dBm Peak: 7 dBm
RF Output Power
Average: 5 dBm Average: 5 dBm
Channel Spacing 50 kHz 50 kHz
Number of Channels 38 38
Modulation GMSK GMSK
TDD Frame Length 10 ms 10 ms
Number of Slots/Frame 2 2
Receiver Sensitivity <-116dBm (@ BER 10 -2 ) <-116dBm (@ BER 10 -2 )
Antenna Gain 2 dBi
Long: 2.5 dBi
Short: 1.5 dBi
Antenna Connector TNC Proprietary
Telephone Interface RJ11 x 2 NA
Channel Coding
½ rateConvolutional +
CRC
½ rateConvolutional + CRC
Transmission Data Rate 42.667kbps 42.667kbps
Speech Coding 8 kbps G.729A 8 kbps G.729A
User Data Rate 32kbps duplex 32kbps duplex
Duplex
Time Division Duplex
(TDD)
Time Division Duplex (TDD)
Multiple Access FDMA FDMA
Number of System ID 65,536 65,536
Ring Signal 20-50 Hz, 12-90 Vrms NA
Flash Time
100-900 ms
programmable
NA
Power Source AC/DC 12V/1A Adapter
3.7 V/1100mAh Li-Ion
Battery
550mA
Charger Current
NA
(550/850 mA for desktop
charger)
Charge Time NA 3hours
EN 301 357-2 (RF) EN 301 357-2 (RF)
EN 301 489 (EMC) EN 301 489 (EMC)
EN 60950 (Safety) EN 60950 (Safety)
Regulation Compliance
EN 50371 (RF safety)
Operating Temperature 0 – 50 °C -10 – 60 °C
Notes:
1. NA = Not Applicable.
2. The manufacturer reserves the right to change designs and specifications
without notice.