SENAO EnGenius EP-801 - Manual (Page 23)

~45~
a. Once turn on the Call Barring feature, you can key
in the “Call Barring” code.
Press
ADD (Left) soft key then start entering the
Call Barring code After the number entered, press
SAVE (Left) soft key to save it.
(1) Up to 5 digits can be edit to be Call Barring code. For
example, if you want to block all call dialing to
Manhanttan, NY area, you can enter 1212 as the
Call Barring code.
(2) If you base station is adjuct to a PBX system, please
also include that specific number to retrieve the
PSTN tone.
b. Press OPTION to delete or edit the Call Barring
codes.
c. Up to 5 set of Call Barring codes can be
programmed.
d. If wants to block all outgoing calls, enter “＊＊＊＊
＊ ”, press SAVE (Left) soft key to save it, all
outgoing calls will be restricted.
Block Incoming Call
1. Press SELECT to confirm your selection for
“Incoming”.
Use
or scrolling key to select blocking
item.
a. Press SELECT to confirm your selection for
receiving or blocking broadcasting.
Press
CHANGE to switch between On and Off of
this setting.
Re: “On” means to be able to receive broadcast
from other hansets or base. “Off” means to restrict
the broadcast from other handsets or base.
~46~
b. Press SELECT to confirm your selection for
receiving or blocking line call.
Press
CHANGE to switch between On and Off of
this setting.
Re: “On” means to be able to receive calls from
outside line; “Off” means to restrict calls from
outside line .
c, Press SELECT to confirm your selection for
receiving or blocking intercom call.
Press
CHANGE to switch between On and Off of
this setting.
Re: “On” means to be able to receive intercom
calls from other handsets or base; “Off” means to
restrict intercom calls from other handset or base.
Programmable Feature Call
1. If EP801 base unit is installed behind a PBX system, it is feasible to pre-
program some feature call along with the PBX’s feature code into the
system.
2. Up to 10 most frequently used feature call codes can be pre-
programmed.
3. Name and enter feature call codes:
a. Press MENU (Right) soft key while the handset is
in the standby mode.
b. Press “4”, followed by “4” to enter the “Feature Call”
menu.
c. Press ADD (Left) soft key to add a new entry of
feature call.
d. Key in the name of feature call, like editing a
phonebook entry, i.e. “PBX Transfer”.
Press
SAVE (Left) soft key to confirm.