Toshiba IPT - Manual (Page 91)

User Programming
Feature Codes
Strata CTX DKT/IPT Telephone 10/03
77
Speed Dial (Storing an SD number)
Station 2
Æ%% +  + Phone No.
3
+ Æ
nnn = 100~199 SD bin numbers
System 2
Æ%% +  + Phone No. 3 + Æ
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station
2
Tƒqvhy 4 Г + Г
nnn = 100~199 Station SD bin numbers
System 2
Tƒqvhy 4 + Á
nnn = 200~999 System SD bin numbers
Start Application Æ '
Travelling Class Override
Enter Code Æ#& , then dial number (enter LCR code if required)
Change Code Æ%( + Index Number + old Code + Æ + new Code + Æ
User Programming Mode Æ('&%
Voice Mail (VM)
Direct Transfer to Voice Mail
While on a call, press 8sU  + Æ#& . Dial VM mailbox
number (usually Ext. Number) + Æ .
Volume Control - Beep With handset off-hook, press ГЖ% . Г Press W‚y
▲
or ▼ .
Volume Control - Ringing With handset on-hook, press ГЖ% ! . Г Press W‚y
▲
or ▼ .
1. If you have “hot dialing,” you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 7 on page 54 to see how to enter and Æ into a speed dial number.
4. If your telephone does not have a Tƒqvhy button, press the button, then dial the three digit Speed
Dial bin number (nnn).
Table 13 Feature Access Codes (continued)
Feature Feature Access Code Sequences
1