Setting the ipt1020-sd headset transmit volume, Viewing ipt1020-sd terminal information – Toshiba IPT User Manual
Page 112
IPT1020-SD Settings
Setting the IPT1020-SD Headset Transmit Volume
98
Strata CTX DKT/IPT Telephone 10/03
Setting the IPT1020-SD Headset Transmit
Volume
1. Press
+
+
+
+ROG
(simultaneously).
2. Press .
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
).
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED
Off = without).
5. Press
+ROG
to set the above data.
6. Go off-hook and hang up.
Viewing IPT1020-SD Terminal Information
1. Press
+
+
+
+ROG
(simultaneously).
2. Press
, then press
+ROG
.
3. Press
)%
to view IPT firmware version (application and boot versions, read
only).
4. Press
)%
to view IPT MAC address (read only).
5. Go off-hook and hang up.
Table 17
Volume Level Transmitted from Headset Microphone
LEDS
Transmit Level
FB3
FB2
FB1
ON
ON
ON
Level 7 (min.)
ON
ON
OFF
Level 6
ON
OFF
ON
Level 5
ON
OFF
OFF
Level 4
OFF
ON
ON
Level 3 (initial value)
OFF
ON
OFF
Level 2
OFF
OFF
ON
Level 1
OFF
OFF
OFF
Level 0 (max.)