Toshiba IPT - Manual (Page 86)

User Programming
One Touch Buttons
72
Strata CTX DKT/IPT Telephone 10/03
One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialed numbers,
such as Speed Dial numbers (use Speed Dial Codes to store additional numbers). One-
touch buttons can be preassigned to your telephone – your System Administrator can
help you identify them.
If you do not have a One Touch button, but you have an available Flexible button, you
can convert the Flexible button to a One Touch button. Perform the procedure called
“Setting/Changing a Flexible Button’s Function” on page 71 (in Step 4, enter the
access code for One Touch button). Once you have created a One Touch button, you
can change the function by using the following procedure.
Changing a One Touch Button
1. Press to enter User Programming Mode.
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialed. You can include the
following in the dial string:
• Dial pad digits ~ .To program special characters, see Table 12 .
• A maximum of 32 characters.
• Station and System Speed Dial index (or bin) numbers can be entered. The
Speed Dial index number will automatically dial out on the extension or Line
programmed on the One Touch button with the associated Speed Dial index
number.
• Function buttons, except One Touch or a 3URJUDP button.
• Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest writing the name or number of the One Touch button on your button
strip.