Answering a call, Handset, Speaker – Toshiba IPT User Manual
Page 24: Handsfree answerback, Switching between handset and speakerphone
The Basics
Answering a Call
10
Strata CTX DKT/IPT Telephone 10/03
Answering a Call
There are several ways to answer a call:
Handset
➤
If your telephone is programmed for Ringing Line Preference, pick up the handset
and the telephone automatically answers the ringing line.
➤
If not, press the button associated with the ringing line (flashing green LED).
Speaker
➤
If your telephone is programmed for Ringing Line Preference, press
6SNU
and the
telephone automatically answers the ringing line.
➤
If not, press the button associated with the ringing line (flashing green LED). Once
connected, you can continue on the speakerphone or lift the handset.
Handsfree Answerback
If you have a speakerphone, it may be programmed for Handsfree Answerback. You
hear a single long tone, followed by the caller’s voice. The extension LED flashes
green (incoming call). The Mic LED lights steady red (microphone is active). The
Spkr LED flashes red.
1. Do not lift the handset; speak toward the telephone in a normal voice.
2. Press
6SNU
or take the handset off-hook before transferring the call or placing it on
hold.
Switching Between Handset and Speakerphone
➤
Press
6SNU
and place the handset on-hook to switch from handset to speakerphone
mode.
➤
Take the handset off-hook to switch from speakerphone to handset mode.