Toshiba IPT - Manual (Page 30)

The Basics
Conference Calls
16
Strata CTX DKT/IPT Telephone 10/03
Conference Split/Join/Drop
This feature enables the conference master to add (Join) other phones to a conference.
The conference master and another member of the conference can leave (Split) the
conference for a private conversation. During this time, other conference members
remain connected.
The conference master can then Join both of the Split callers back into the conference,
or the master can Drop (disconnect) the member he/she is connected to. This feature
is performed with Soft Keys, so an LCD phone is required.
Note There are no feature access codes or feature keys for this feature.
Important! You must be a conference master to perform the Split and Drop
features.
➤ To Split from a conference
1. Press the SPLIT Soft Key. Your LCD shows first conference party member. Press
NEXT until you see the extension that you want to talk with privately.
...or if you want to return you back to the original conference, press RTRN .
2. Press the number of the party that you want to Split out
of the conference. Example (shown right), if you want to
Split with extension 3388, press
on the dial pad.
3. You can return both yourself and the other Split party
back into the conference by pressing JOIN .
➤ To Drop the Split party from a conference
➤
Press the DROP Soft Key. The party that you are talking to privately (the party
which you have Split from the conference) will be disconnected (Dropped) and
you will rejoin the conference.
Note If you are in a three-way conference and Split with one of the parties, the
remaining party will essentially be “on hold” until you return to the conference.
2:3388
RTRN NEXT
3388
JOIN DROP