Tascam RC-898 - Manual (Page 65)

10.1 - Menu groups
10-1
10 – Menu and parameter reference
10.1 Menu groups
This section provides a quick guide to the menus and their functions, providing a list of menus in each menu
group, the parameters available in each menu, and the values that each parameter can take (factory values are
underlined). There is also, wherever appropriate, a reference to the section of the manual in which the func-
tion is described. Wherever a menu function is applicable to only a certain type or types of DTRS unit, this is
indicated.
Please also note the section 10.2, “Alphabetical list of menu items”, which allows you to find menu functions
from an alphabetically-sorted list.
Menu group 0
Menu item Parameter(s) Values Reference
Track Delay Time Track
Delay time
Unit
1 through 4 8 , 1-8,9-16, 17-24,
25-32, 33-40, 41-48
-200 through 7200 (samples)
-4 through 150 (msec)@ 48kHz
-4 through 163 (msec) @ 44.1kHz
default 0
sample , msec
7.1.1, “Track delay”
Vari Speed Enabled
Amount
Fix , Vari
-6.0% through +6.0% (default is 0.0% )
7.2.8, “Varispeed
(pitch control)”
Track Copy Track source Input (digital or analog) 1 through 8 or
track 1 through 8. Default is straight-through input
to tracks assignment
7.1.2, “Track copy-
ing”
Enabled Turns track copy operations on or off
Locate Pre-roll Minutes and
seconds 00min00sec through
59min59sec
6.5.1, “Setting the
location pre-roll
value”
D e l a y T r k C o p y
V a r i S p d L o c P r e
38 98