Tascam RC-898 User Manual
Rc-898
Table of contents
Document Outline
- Table of Contents
- 1 - Introduction
- 2 - RC-898 features
- 2.1 Front panel
- [1] REC FUNCTION keys
- [2] INPUT MONITOR keys
- [3] ALL SAFE key
- [4] ALL INPUT key and indicator
- [5] AUTO MON key and indicator
- [6] CLOCK indicators (INT, WORD and VIDEO)
- [7] TC indicators (24, 25, 29, 30, DF)
- [8] MACHINE number indicators (1 through 6, E1, E2)
- [9] LOCK STATUS indicators
- [10] OFFSET, PULL UP/DN, CONFIDENCE, DELAY, TC REC, VARI indicators
- [11] LCD display screen
- [12] Time Mode indicators
- [13] TAPE TIME display
- [14] MEMORY NO. display
- [15] LOCATE TIME/VALUE display
- [16] Numeric keypad
- [17] STR key
- [18] RCL key
- [19] CANCEL key
- [20] ENTER/LOAD key
- [21] PRESET key
- [22] F1 through F10 function keys
- [23] SHIFT key
- [24] ESCAPE key
- [25] Cursor keys
- [26] SELECT key
- [27] DATA INC/DEC key and indicator
- [28] JOG dial and SHUTTLE wheel
- [29] CAPTURE key
- [30] REPEAT key and indicator
- [31] MACHINE key
- [32] CHASE key
- [33] AUTO PLAY key and indicator
- [34] PRRL key and indicator
- [35] RHSL key and indicator
- [36] AUTO PUNCH key and indicator
- [37] MARK IN key
- [38] MARK OUT key
- [39] CUE STR key
- [40] Transport controls
- [41] LOC key
- 2.2 Rear Panel
- 2.1 Front panel
- 3 - Connections
- 4 - Menu and basic operations
- 5 - Basic DTRS operations
- 6 - Location functions
- 7 - Making settings on the DTRS units
- 7.1 Track operations
- 7.2 Unit-related functions
- 7.2.1 Chasing to ABS sync
- 7.2.2 Key Mode
- 7.2.3 Chasing with an offset
- 7.2.4 Auto Offset function
- 7.2.5 Checking the offset
- 7.2.6 Clock selection
- 7.2.7 Output timing
- 7.2.8 Varispeed (pitch control)
- 7.2.9 Input selection
- 7.2.10 Word length
- 7.2.11 Dither
- 7.2.12 Confidence mode
- 7.2.13 Reference levels
- 7.2.14 Meter modes
- 7.2.15 Sine oscillator
- 8 - Timecode functions
- 8.1 Primary timecode functions
- 8.1.1 Selecting the timecode source
- 8.1.2 Synthesizing timecode from ABS times
- 8.1.3 Selecting a timecode type
- 8.1.4 Setting the generator start time
- 8.1.5 Starting and stopping the generator
- 8.1.6 Checking the generator progress
- 8.1.7 Recording the timecode on a DTRS timecode track
- 8.1.8 Chasing to external timecode
- 8.1.9 Chasing with a timecode offset.
- 8.1.10 Auto Timecode Offset function
- 8.1.11 Independent clock settings
- 8.2 Advanced timecode functions
- 8.1 Primary timecode functions
- 9 - External control and settings
- 10 - Menu and parameter reference
- Index