Placement of the projection screen, Using the screen – Toshiba TDP-FF1A User Manual

Page 34

Text mode
Original mode

Placement of the projection screen

Using the screen

Please follow the steps below to set up the screen.



Open the screen fully, and pull out the stand on the back of the screen and fasten the

fastener.



Fold out the bottom of the screen and set up the screen vertically. The image can be

projected fully on the attached screen when the distance between the projector and the

screen is about 80 cm.

Notes

• Place the projector and the screen on a ﬂat place; assure they are stable.
• Image quality can be changed due to the viewing angle to the screen.
• The surface of the screen is covered with a special coating. Do not stain it, scratch it

or write anything on it.