Toshiba TDP-FF1A - Manual (Page 32)

32
Using USB Memory
(continued)
Use or to select [Yes] and press , the slideshow ends and the projector switches
to the file view mode.
Use or to select [No] and press , Menu OSD shows on the screen. Change the
settings through menu system including USB slideshow setting.
About USB memory function
 The USB terminal
The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB
memory.
 USB memory
• 2GB limited USB memory size.
• Do not support USB HDD (Hard disk).
• Do not support USB hub.
 USB devices whose operation has been verified.
TOSHIBA does not guarantee the operation of all listed USB devices.
TOSHIBA
• U2A series
• U2B series
Sandisk
• SDCZ2 series
 Backing up the data
Toshiba recommends that you back up the data saved in the memory PC card, the USB
memory, and in the memory card before use. (Toshiba assumes no liability for losses
incurred by data lost through the use of this projector.)
 Exit Slideshow / Change slideshow settings
Press [Menu/input] key for longer than 1 second during the slideshow, and the following
message appears.