Toshiba TDP-FF1A - Manual (Page 27)

27
Operations
Using handy features
Using auto setting
(Only for computer input)
This function sets up the projector to the optimum state such as sampling
phase, frequency and screen position, for each type of the input signal by
using simple operations.
Press the AUTOSET button on the remote control.
For computer input, the icon will appear during processing.
You can also enter AUTOSET / button on the projector.
Note
• The image may not be projected or auto adjustment/setting may not be performed
correctly for input signals other than those supported by the projector , .
Correcting the keystone distortion
When the projector placement angle against the screen
is changed while projecting the image, the picture will
undergo keystone (trapezoidal) distortion.
This projector can correct for this keystone distortion.
Press the remote control’s KEYSTONE or button.
You can also select [ Keystone] in the Image adjustment menu .
Before correction After correction
Remote
Control
Remote Control