Toshiba TDP-FF1A - Manual (Page 25)

25
Operations
Turning the power on and off
Connecting the power cord
1 Plug the power cord into the adaptor.
2 Insert the power cord connector into the DC IN socket of the
projector or install the battery pack.
3 Switching the power on (I)
Switch the power button to turn on the projector, then the power indicator on the LED
lights green, and the start-up screen appears.
CAUTION
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not look into the lens while the projector is on. The light from the projector may cause dam-
age to your eyes or sight.
Start-up screen
Note
• The start-up screen will disappear after a moment. You can also configure the start-up
screen not to appear via the Default setting menu .
4 Switching the power off (O)
Switch the power off will shut off the power immediately.
2
3
POWER I
O
1