A5.4 parameter setting (cont.) – Toshiba CB-416-T3-QQ User Manual
Page 108
Appendix 5 System Mode
100
Specifying the Print Head to be Used
Press the PAUSE key.
After “PM ADJUST” appears, press the FEED key.
To select which print heads will be used, press the PAUSE key.
Select “ON” to use the black print head. Otherwise “OFF” will
disable the head.
After making a selection, press the PAUSE key.
Make a selection for the other three colors in the same manner.
After making the selections, press the PAUSE key, and the
message returns to “<2> PARAMETER SET”.
Specifying the Ribbon Type to be Used
Press the PAUSE key.
After “HEAD SELECT” appears, press the FEED key.
The ribbon type for each color can be selected. Press the PAUSE
key.
Select which ribbon will be used for the black ribbon: F1 (Hot
Release Ribbons) or P1S (Cold Release Ribbons).
After selecting the ribbon type, press the PAUSE key.
Select the ribbon type for the other color ribbons in the same
manner.
After selecting the ribbon type for all colors, press the PAUSE
key. The message returns to “<2> PARAMETER SET”.
Note:
Use the FEED or RESTART key
to enter a desired option.
PM ADJUST
HEAD SELECT
BLACK ON
MAGENTA ON
Note:
The ribbon type can also be changed
in the printer properties on the
computer. See Section 3.8.1.
HEAD SELECT
RIBBON
BLACK F1
MAGENTA F1