Using the tv’s features, Selecting the video input source to view – Toshiba 46HM94 User Manual

Page 66

(E) 46/52/62HM94

To select the video input source to view:

1. Press INPUT on the remote control or TV/VIDEO on the

TV front panel.

2. Press 0–7 to select the input source you want to view,

depending on which input jacks you used for connecting your
devices (see Chapter 2).
The current signal source displays in the top right corner of
the INPUT SELECTION screen.

Note:

• While the Input Selection screen is open, you also can use the

buttons on the remote control (or the Channel

yz buttons on the

front panel) to change the input.

• While the Input Selection screen is not open, you can repeatedly

press the INPUT button on the remote control or the TV/VIDEO
button on the TV front panel to change the input.

• To select an IEEE-1394 input source, press the TheaterNet

DEVICE button on the remote control (see page 26 & 44).

• If an IEEE-1394 device is the current input, it will appear at the

bottom of the Input Selection list; however, it will be removed from
the list if the input source is changed.

• You can label the video input sources according to the specific

devices you have connected to the TV (see next page).

• The source can be “hidden.” See page 67 for details.

• If you use the TV’s remote control to start recording, you will not

be able to change inputs during recording.
If you use a device other than the TV’s remote control to start
recording and then change inputs, the recorded audio and video
may be affected.

CT-90216

ACTION

ENTER

MENU

–

100

+10

TV/VIDEO

TV front touchpad

Using the TV’s features

INPUT

CHANNEL

Selecting the video input source to view

Numbers

VOLUME

CHANNEL

EXIT

TV/VIDEO

POWER

{

Remote control

HM94(E)066-75(8a-UseTV)

8/31/04, 2:36 PM