Toshiba 46HM94 - Manual (Page 35)

(E) 46/52/62HM94
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 35
MENU VOLUME CHANNEL EXIT TV/VIDEO POWER
You can use the buttons on the remote
control or TV front touchpad to access and
navigate your TV’s on-screen menu system.
• Press MENU to open the menu
system.
• Use the up/down/left/right arrow
buttons ( yzx •) on the remote
control or TV front panel to move in
the corresponding direction in a menu.
• Press ENTER to save your menu
settings or select a highlighted item.
(A highlighted menu item appears in a
different color in the menu.)
Chapter 4: Menu layout and navigation
* The MENU button on the TV front touchpad functions
as the ENTER button when a menu is on-screen.
TV front touchpad
y MENU
(ENTER*) EXIT x • z
EXIT
MENU
ACTION
ENTER
MENU
–
100
+10
y
x •
z
ENTER
Remote control
Navigating the menu system
• All menus close automatically if you do not make a selection within 60 seconds, except the
signal meter menu, which closes automatically after 5 minutes.
• To close a menu instantly, press EXIT.
Setup / Installation menu layout
(continued)
To open the INSTALLATION menu (illustrated below): press MENU on the remote control or TV front panel, open the SETUP
menu, select INSTALLATION, and press ENTER.
MENU / Setup / Installation
TV Guide On Screen Setup ➞ Start ➞ [ Start TV Guide On Screen setup ]
Time and Date ➞ Start Setup ➞ [ Time and Date Setup window ]
System Status ➞ System Information ➞ [ System Information window ]
➞ Input Configuration ➞ [ Input Configuration window ]
Terrestrial ➞ Channel Program ➞ ANT1 }
➞ [ Scan for new channels on selected antenna ]
➞ ANT2
➞ Channel Add/Delete ➞ [ Terrestrial Channel Add/Delete window ]
➞ Signal Meter ➞ [ Signal Meter window ]
Devices
➞ IEEE-1394 Devices ➞ [ IEEE-1394 Device Management window ]
➞ TheaterNet Devices ➞ [ TheaterNet Device Setup window ]
HM94(E)034-35(4-Menus) 8/31/04, 1:11 PM 35