TRENDnet Industrial Single Board Computer HS-6038 - Manual (Page 41)

35
4.9 Peripheral Setup
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the BIOS
issue a series of commands to affect the transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and then
let the controller and the CPU perform the complete task by them. This
is much simpler and more efficient (also faster).
AMIBIOS SETUP – PERIPHERAL SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled Available Options:
OnBoard Serial Port A 3F8/COM1 ` Disabled
OnBoard Serial Port B 2F8/COM2 Enabled
Serial Port B Mode Normal
IR Duplex Mode Half Duplex
IR Pin Select IRRX/IRTX
OnBoard Parallel Port 378
Parallel Port Mode Normal
EPP Version N/A
Parallel Port IRQ 7
Parallel Port DMA Channel N/A
Keyboard Power On Function Disabled
Specific Key for Power On N/A
Mouse Power On Function Disabled
On-Chip IDE Both ESC:Exit :Sel
OnBoard Lan Enabled PgUp/PgDn: Modify
F1:Help F2/F3:Color