TurboChef Technologies 2020 HIGH h User Manual

Page 22

1 4

EC=82F 208V

RUN: 65432 HR
IDLE: 12345 HR

INFO

SERIAL_NUMBER

SOFTWARE VERSION

Figure 19: Info Screen

DEGS F

EDIT/RIGID/FLEX

ENGLISH

SETUP MENU

INFO

Figure 16: Setup Mode

Changing the Display Temperature

The oven can display the temperature in either Celsius
or Fahrenheit units. To change the display
temperature, press L1 in

SETUP MODE

(Figure 16).

Edit Options Screen

The edit options screen (Figure 18) allows the user to
switch between full edit, rigid, and flex options for
profile name, belt speed, temperature, and % air. For
more information on the different edit options, see
Editing a Cooking Profile on page 11.

To access the edit options screen,
1. Press L3 (Figure 16) to access the password

screen (Figure 17).

2. Input the password

6 6 3 3

by pressing the

soft keys adjacent to the numbers.

To change the edit option (Figure 18),

- Press L1 to select full edit or rigid for the profile

name.

- Press L3 to select full edit, rigid, or flex for the

belt speed.

- Press R1 to select full edit, rigid, or flex for the

profile cook temperature setting.

- Press R3 to select full edit, rigid, or flex for the

% air setting.

Changing the Display Language

NOTE: Feature is not available on all oven models.

From the setup menu screen (Figure 16), press R1 to
set the language to English, French, German, or
Spanish.

Info Screen

The info screen (Figure 18) is used to display the fol-
lowing information in an easy to access place:

- Serial number
- Electrical compartment temperature
- Voltage
- Total time the oven has been on
- Total time the oven has been idle
- Firmware version

To access the info screen, press R3 within the

SETUP

MODE

(Figure 16).

F1: 0
F2: 0
F3: 0
F4: 0
F5: 0

F6: 0
F7: 0
F8: 0
F9: 0

F10: 0

FAULT COUNTS

Figure 15: Fault Counts Screen

<6633>

ENTER PASSWORD

Figure 17: Password Screen

NAME: FULL

BELT: RIGID

EDIT MODES

SELECT

TEMP: FLEX

AIR: FLEX

Figure 18: Edit Option Screen

O V E N M O D E S