TurboChef Technologies 2020 HIGH h User Manual

Page 18

1 0

S TA N DA R D O V E N O P E R AT I O N

Mode 3: Warming

Mode during which the oven warms to the preset
cooking temperature defined by the cooking profile
that was selected.

Happens When...
- A selection is made from

MODE

2, and the oven’s

temperature at the beginning of warmup was not
within (less than) 25°F (14°C) of the oven’s set
temperature.

Goes To...
-

MODE

4 once the oven has reached the temperature

defined by the selected cooking profile.

MODE

6 when the user presses the back/off key

and the oven is above 150°F (66°C).

Mode 4: Soaking

Mode during which the oven has completed
warming up and automatically allows an additional
five minutes for the oven cavity surfaces to warm.

Happens When...
-

MODE

3 completes (within 5°F [3°C] of set point)

Goes To...
-

MODE

5 when soaking completes.

MODE

6 when the user presses the back/off key and

the oven is above 150°F (66°C).

Mode 5: Cooking

Mode during which the oven is ready to cook. The
user can place food on the conveyor to cook, or edit
cook settings if the full edit or flex option is enabled.
See page 11 for more information on full edit and
flex options.

Happens When...
-

MODE

4 completes.

- The user presses the idle key, up key, down

key, or any soft key during

MODE

Goes To...
-

MODE

6 when the user presses the back/off key.

MODE

7 when the user presses the idle key.

MODE

3 if the temperature drops 25°F (14°C)

or more below the set point.

Mode 6: Cooling Down

Mode during which the burner assembly shuts off to
allow the oven to cool.

Happens When...
- The user presses the back/off key from

MODE

(and the oven temperature is above 150°F [66°C]),
or from

MODES

4, 5, or 7.

Goes To...
-

MODE

1 when the oven temperature has receded

below 150°F (66°C).

MODE

2 when the user selects a cooking profile.

Mode 7: Idle

Mode during which both blowers are reduced to
30% and the belt speed reduces to 20 minutes to
save power. All other oven components remain the
same.

Happens When...
-The user presses the idle key from

MODE

Goes To...
-

MODE

5 when the user presses the idle key, up

key, down key, or any soft key.

MODE

6 when the user presses the back/off key.