Onkyo PR-SC886 - Manual (Page 95)

95
Advanced Setup
—Continued
Equalizer Settings
With the Equalizer settings, you can adjust the tone of
speakers individually with a 7-band equalizer. The vol-
ume of each speaker can be set on page 93.
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “2. Speaker
Setup”, and then press [ENTER].
The “Speaker Setup” menu appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select “5. Equalizer Set-
tings”, and then press [ENTER].
The “Equalizer Settings” screen appears.
These settings are set automatically by the Automatic
Speaker Setup function (see page 58).
1, 8
1
2-7
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
MOVE ENTER RETURN ENTER RETURN EXIT SETUP
RETURN RETURN EXIT SETUP MOVE VALUE
2–5. Equalizer Settings
Equalizer
Channel
25Hz
40Hz
63Hz
100Hz
160Hz
250Hz
400Hz Manual
Front
0dB
0dB
0dB
0dB
0dB
0dB
0dB
4 Use the Left and Right [ ]/[ ]
buttons to set the “Equalizer”
option to:
Off: Equalizer off, flat response.
Manual: The equalizer for each
speaker can be set manually.
MultEQ XT
*1
Dynamic EQ
*1
Dynamic Vol(Light)
*1
Dynamic Vol(Heavy)
*1
*1 These setting can be selected after having
performed the Automatic Speaker Setup.
As soon as the Automatic Speaker Setup is
complete, it will automatically be set to
Dynamic EQ™.
When “Dynamic EQ” is selected,
“MultEQ
®
XT” and “Dynamic EQ”
become available.
When “Dynamic Vol(Light)” or
“Dynamic Vol(Heavy)” is selected,
“MultEQ XT”, “Dynamic EQ”, and
“Dynamic Volume
™
” become avail-
able.
If you selected “Manual”, continue
with the next step. If you selected oth-
ers, go to step 8.
RETURN RETURN EXIT SETUP MOVE VALUE
2–5. Equalizer Settings
630Hz
1000Hz
1600Hz
2500Hz
4000Hz
6300Hz
10000Hz
16000Hz 0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB