Onkyo PR-SC886 - Manual (Page 47)

47
First Time Setup
—Continued
In this Instruction Manual, illustrations from the onscreen menu or explanations referring to the menu will be in the
same language as the Instruction Manual. The default Language setting for the onscreen menu is English. If your
Instruction Manual is in a language other than English, first follow the instructions below to change the Language.
This setting determines the language used for the
onscreen setup menus. You can select: English, German,
French, Spanish, Italian, Dutch, Swedish, or Japanese.
Selecting the Language used for the
onscreen setup menus
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “6. Miscella-
neous”, and then press [ENTER].
The “Miscellaneous” menu appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select “2. OSD Setup”,
and then press [ENTER].
The “OSD Setup” menu appears.
Note:
The “TV Format” (*) setting is not
available on the North American mod-
els.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
MOVE ENTER RETURN ENTER RETURN EXIT SETUP
6–2. OSD Setup
Immediate Display
Monitor Type
Display Position
TV Format
Language On
16 : 9
Bottom
Auto
English
MOVE VALUE RETURN RETURN EXIT SETUP
4 Use the Up and Down [ ]/[ ] but-
tons to select “Language”, and
then use the Left and Right
[
]/[ ] buttons to select:
English, German, French, Spanish,
Italian, Dutch, Swedish, Japanese
5 Press the [SETUP] button.
The setup menu closes.