One for All URC-7781 - Manual (Page 29)

28
WWW.ONEFORALL.COM
Problem:
Your brand is not listed
in the code section?
The URC-7781 does not operate
your device(s)?
The URC-7781 is not
performing commands
properly?
Problems changing channels?
Video not recording?
The URC-7781 does not respond
after pressing a key?
The LED does not
blink when you press a key?
The LED blinks 5 times every
time you press a key and
the LCD shows “BATTERY
LOW”?
You cannot enter programming
mode by pressing and holding
MAGIC?
Solution:
Just use the ARROW Left/Right keys to scroll
through the codes contained in the memory (see
Step 5 on page 6 - SEARCH METHOD).
A) Try all the codes listed for your brand see pages
301 - 315.
B) Just use the ARROW Left/Right keys to scroll
through the codes contained in the memory
(see Step 5 on page 6 - SEARCH METHOD).
You may be using the wrong code. Try repeating
the Direct Set-Up using another code listed
under your brand or start the search method over
again to locate the proper code.
Enter the programme number exactly as
you would on your original remote.
As a safety feature on your URC-7781, you must
press the Record key twice.
Make sure you are using new batteries and are
aiming the URC-7781 at your device.
Replace batteries with 4 fresh, new “AAA/LR03”
alkaline batteries.
Replace batteries with 4 fresh, new “AAA/LR03”
alkaline batteries.
Replace batteries with 4 fresh, new “AAA/LR03”
alkaline batteries.
Trouble-Shooting
706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:02 Pagina 28