One for All URC-7781 - Manual (Page 18)

ADD TO VOL LOCK
RCV TV VCR
WW W.ONEFORA LL.COM
17
INITIAL
SETUP
DEVICE
VOLUME LOCK
SET VOLUME LOCK
ADD DEVICE
TO VOLUME LOCK
Extra Features
Add Device To Volume Lock
Example: It is possible to add a device to the installed volume lock (SRC). You may want
to do this for devices you added after installing the volume lock, or if you removed a
device from the volume lock.
1 Press and hold down MAGIC
for about 3 sec. and...
will appear on the screen.
2 Press ENTER...
will appear on the screen.
3 Press ”ARROW Right” twice...
will appear on the screen.
4 Press ENTER...
will appear on the screen.
5 Press ”ARROW Right” twice...
will appear on the screen.
6 Press ENTER...
will appear on the screen.
Select the device (e.g. TV) you want to add to the volume lock using
the ARROW Left / Right keys.
7 Press ENTER to add the displayed device to the volume lock. The
LED underneath the POWER key will light up twice and the display
will return to VOLUME LOCK.
Result: The selected device will now send the volume +/-, mute of the SRC device.
Reset All Volume Controls
Example: You can reset all volume controls back to their original setting, so that all
devices will send their own volume again.
1 Press and hold down MAGIC
for about 3 sec. and...
will appear on the screen.
2 Press ENTER...
will appear on the screen.
3 Press ”ARROW Right” twice...
will appear on the screen.
4 Press ENTER...
will appear on the screen.
5 Press ARROW Left...
will appear on the screen.
6 Press ENTER to reset all volume controls.
The LED underneath the POWER key will
light up four times and the display will
return to VOLUME LOCK.
Result: All devices will now send their own volume +/-, mute again.
INITIAL
SETUP
DEVICE
VOLUME LOCK
SET VOLUME LOCK
RESET ALL
VOLUME CONTROLS
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
x2
x2
x2
706159_7781_E_10t:12_Device_7780_Euro_10_Talen 18-07-2007 11:01 Pagina 17