Onkyo DV-BD606 - Manual (Page 43)

43
FUNCTION SETUP
EN
Initialise the setting or SD Memory Card.
Initialize
1 In stop mode, press [SETUP].
2
Use [K / L] to select , then press
[ENTER].
3 Use [K / L] to select a desired option,
then press [ENTER].
“No”: Exits without any initialisation.
“Setup”: Resets the setup menu to the default.
“Memory Device”:
Initialises the SD Memory Card. After
confirmation message appears, use
[K / L] to select “Yes”, then press
[ENTER].
4 Press [ENTER]. (For “Setup” and
“Memory Device” only)
5 Press [SETUP] to exit.
Note
• The setting for “Parental” will not be reset.
• If SD Memory Card is not inserted, “Memory Device”
will be displayed in gray.
Initialize
Initialize?
No
Setup
Memory Device
E5J50ED_EN.book Page 43 Wednesday, September 10, 2008 11:10 PM