Onkyo DV-BD606 - Manual (Page 20)

20 EN
BASIC PLAYBACK
Playing Back
BD-V DVD-V 1 Press [ON / STANDBY I /
Q].
2 Turn on the TV and select the
appropriate input on the TV to
which the unit is connected.
3 Press [OPEN/CLOSE A] to open the
disc tray.
4 Place the disc on the disc tray with
its label side facing up.
5 Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6 Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
In this case, use [K / L / s / B] to select the
desired item, then press [ENTER].
7 Press [STOP C] once to stop
playback temporarily.
Refer to “Resume Playback” on page 21.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray,
then remove the disc before turning off the
unit.
Note
• may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back BD-
video and DVD-video with disc menu. Refer to the
manual accompanying the disc for details.
Align the disc to the
disc tray guide.
E5J50ED_EN.book Page 20 Wednesday, September 10, 2008 11:10 PM