Onkyo DV-BD606 - Manual (Page 27)

27
SPECIAL PLAYBACK
EN
You can play back the specific part (between point A and
point B) repeatedly.
1 During playback, press [A-B] at the desired
starting point A.
2 During playback, press [A-B] at the desired
ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by pressing
[PIP] whenever the scene contains the secondary video.
1 During playback, press [PIP].
PIP information will appear.
2 Use [K / L] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
3 Press [RETURN] or [PIP] to remove the PIP
information.
You can play back the disc in your desired order.
1 In stop mode, press [MODE].
• The programme screen will appear.
2 Use [K / L] to select a track / file, then press [ENTER].
• For MP3 and JPEG files, use [K / L] to select a folder,
then press [ENTER] first, and then use [K / L] to
select a file, then press [ENTER].
• Press [CLEAR] to erase the last file of the programme.
• Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the programme.
• The programmed tracks / files is displayed in the right
hand screen.
• If the entire programme cannot be displayed on the
TV screen, “K” or “L” appears.
• Use [s / B] to go back forward between the
hierarchy of folders.
• If 8 or more tracks / files were set in a programme, use
[SKIP H / G] to see all the tracks / files.
3 Press [PLAY B] to start programme playback.
• Programme playback will start.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track, group or all repeat playback.
• For some DivX ® files, A-B Repeat playback may not
function.
PIP (Picture in Picture) (BONUSVIEW) Setting
Note
• The secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HDMI Audio Out”. Refer to
“Switching Audio Soundtrack” on page 30 and
“Setting the BD Audio Mode” on page 31.
BD-V DVD-V CD DivX
BD-V
primary
video
secondary
video
Programme Playback
Note
• During programme playback, press [STOP C] once
to set the resume point, and then press [PLAY B] to
resume programme playback from where [STOP C]
was pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 or JPEG).
• During programme playback, press [STOP C] twice
to display the programme screen. To go back to the
normal programme playback, press [RETURN] to exit
from the programme screen, then press [PLAY B].
• If you open the disc tray, remove the SD Memory Card
or turned off the power, the programme will be cleared.
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the programme,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
programme, press [REPEAT] repeatedly until
“
All” appears during playback.
• Even if an inserted disc contains mixed MP3 and
JPEG files, programme function allows 99 files in
combination of MP3 and JPEG files.
• Playback from a desired track / file and random
playback are not available during programme
playback.
CD MP3 JPEG
e.g.) audio CD
CD-DA 0:09:49
1
2
3
4
5
6
7
3:40
2:33
2:22
2:28
2:45
3:41
2:58
6 3:41
1 / 3 1 / 1
1
4
6 3:40
2:28
3:41
Program
Total
E5J50ED_EN.book Page 27 Wednesday, September 10, 2008 11:10 PM