Outlaw Audio 970 - Manual (Page 21)

1 Model 970 7.1 Channel Preamplifier Processor
Owner’s Manual
Connecting Your Model 970
Connecting Other Video Components to the Model 970
Optical Coaxial
Digital Analog
L R
Digital
Optical
Coaxial
Analog
AUDIO
VIDEO
PLAY OUT PLAY OUT REC IN REC IN
L
R
Composite S-Video
Composite S-Video Component DVI Out
IN
OUT
Video Device
(DVD Player, Satellite Receiver, Cable Box, etc.)
Video Recording Device
VIDEO
AUDIO
Y P
B
P
R
AUDIO CONNECTION NOTE:
When making digital audio connections,
use either the Coaxial or
Optical connection, but not both.
For Coaxial connections, use either
COAX 1, 2 or 3. Likewise, Optical
connections OPT 1-3 are interchangeable.
You will configure the Model 970 later
to use the specific input you have chosen.
VIDEO CONNECTION NOTE:
Your connection requirements will
vary according to your video gear’s
capabilities. In most cases, only one
type of video connection is required.
Make sure to use the connections that
correspond to the same video input. For
example, if you connect a component’s
composite or S-Video output to the Video 2
inputs on the Model 970, you must also use
the Component Video 2 inputs as well.
If a DVI (or HDMI) output is available,
connect it in place of the component
video outputs.
The Connection Record Chart on page 15
provides an easy way to determine which
video connections are associated with a
particular input.