Omni Group GREEN SMART 864 - Manual (Page 55)

Optional Equipment
(for qualified installers only)
55
© Travis Industries 4090507 100-01217_000
Fireback Installation
WARNING:
Turn off gas to the appliance and make sure it has fully cooled prior to conducting
service.
1
Remove the glass frame and logs.
2 Remove the front and rear grates (NOTE: lift the burner slightly to remove the grate - see the
illustration below).
NOTE: If the accent light deflectors have been bent, carefully bend the accent light deflectors
inwards on both sides (NOTE: do not over-bend these deflectors, they will break off if over-bent).
3 Remove and discard the steel ember trays.