Olympus PT-019 - Manual (Page 9)

E-8
Install the special balance weight. E-18
Installation and Removal of the LCD Hood E-19
Installation E-19
Removal E-19
Mounting and Removing the Lens Cap E-20
Perform the final checks. E-20
Visual Inspection E-20
Set the power to 'ON'. E-20
Try to move the mode dial. E-20
Final Test E-21
4. Taking Pictures Under Water E-22
How to Use the Hand Strap E-22
Take pictures carefully. E-22
Confirm the picture on the LCD monitor. E-22
Quietly press the shutter lever. E-22
Cautions when using the flash E-22
5. Handling After Shooting E-23
Wipe off any waterdrop. E-23
Take out the digital camera. E-24
Wash the Case with pure water. E-25
Dry the Case. E-25
6. Maintaining the Waterproof Function E-26
Remove the O-ring. E-26
Remove any sand, dirt, etc. E-26
Install the O-ring. E-27
How to Apply Grease to the O-ring E-27
Replace consumable products. E-28
7. Appendix E-29
Q & A on the use of the PT-019 E-29
After-sale Service E-34
Specifications E-35