Changing the pin number – Onkyo HT-S5200 User Manual
Page 59
59
Listening to SIRIUS Satellite Radio
Changing the PIN Number
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “10. Parental
Lock”, and then press [ENTER].
Note:
If the “SATRadio” is set to “None” (see
page 53), the “ParentalLock” item is
not available.
3
Use the Up and Down [ ]/[ ]
buttons to select “Edit Code,”
and then press [ENTER].
“Enter : <0>” appears on the display.
/
/ /
SETUP
ENTER
RECEIVER
Number
buttons
4
Use the number buttons to enter
the old PIN number.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, and will
need to start again. “New : <0>”
appears on the display.
5
Use the number buttons to enter
the new PIN number.
“Confirm: <0>” appears on the
display.
6
Enter the new PIN number again.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, and will
need to start again.
7
Press the [SETUP] button.
Setup closes.
HT-S5200_En.book 59 ページ ２００９年３月９日 月曜日 午後４時３１分