Setting the satellite radio mode, Selecting sirius satellite radio, Signing up for sirius satellite radio – Onkyo HT-S5200 User Manual
Page 53: Listening to sirius satellite radio —continued
53
Listening to SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You’ll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
Setting the Satellite Radio Mode
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “8. Hardware”,
and then press [ENTER].
3
Use the Up and Down [ ]/[ ] but-
tons to select “SATRadio”.
Pressing the Left and Right [
]/[
]
buttons cycles through the following
options: None
Q
SIRIUS
None: Select if you’re not using
Satellite Radio.
SIRIUS: Select to use SIRIUS Satel-
lite Radio.
/
/ /
SETUP
RECEIVER
TUNER
TUNER
ENTER
Remote
controller
Remote
controller
Remote
controller
4
Press the [SETUP] button.
Selecting SIRIUS Satellite Radio
1
On the AV receiver, press the
[TUNER] INPUT SELECTOR
button repeatedly to select
SIRIUS.
On the remote controller, press
the [RECEIVER] REMOTE MODE
button, and then press the
[TUNER] INPUT SELECTOR
button repeatedly to select
SIRIUS.
If “CHECK SR TUNER” appears on
the display, make sure the
SiriusConnect receiver is connected
properly. If “ANTENNA ERROR”
appears, make sure the antenna is
connected properly.
Signing Up for SIRIUS Satellite Radio
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select
“9. Antenna Aim”, and then
press [ENTER].
Remote
controller
Remote
controller
AV receiver
Remote
controller
Remote
controller
HT-S5200_En.book 53 ページ 2009年3月9日 月曜日 午後4時31分