Onkyo HT-S5200 - Manual (Page 12)

12
Front & Rear Panels
—Continued
DIGITAL IN COAXIAL 1 and 2
These coaxial digital audio inputs are for
connecting components with a coaxial digital audio
output, such as a CD player or DVD/BD player.
They’re assignable, which means you can assign
each one to an input selector to suit your setup. See
“Digital Input Setup” on page 42.
DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD/BD player. They’re
assignable, which means you can assign each one to
an input selector to suit your setup. See “Digital
Input Setup” on page 42.
COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for
connecting components with a component video
output, such as a DVD/BD player, DVD/BD
recorder, or DVR (digital video recorder). They’re
assignable, which means you can assign each one to
an input selector to suit your setup. See
“Component Video Input Setup” on page 42.
COMPONENT VIDEO OUT
This RCA component video output is for
connecting a TV or projector with a component
video input.
HDMI IN 1–4 and OUT
HDMI (High Definition Multimedia Interface)
connections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD/BD player,
DVD/BD recorder, or DVR (digital video recorder).
The HDMI outputs are for connecting a TV or
projector with an HDMI input.
AM and FM ANTENNA
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
MONITOR OUT
The composite video jack should be connected to a
video input on your TV or projector.
PORT
This jack is for connecting the supplied UP-A1L
Dock.
FRONT L/R, CENTER, SURR L/R, and SURR
BACK L/R SPEAKERS
These terminal posts are for connecting the front
speakers, center, surround, and surround back
speakers.
REMOTE CONTROL
This (Remote Interactive) jack can be
connected to the jack on another -capable
Onkyo component for remote and system control.
To use
, you must make an analog audio
connection (RCA) between the AV receiver and the
other component, even if they are connected
digitally.
SIRIUS
This jack is for connecting the SiriusConnect
receiver (not supplied).
CD IN
This analog audio input is for connecting a CD
player’s analog audio output.
TV/TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
Rear Panel
HT-S5200_En.book 12 ページ ２００９年３月９日 月曜日 午後４時３１分