Oki MC160n - Manual (Page 177)

177 Maintenance
„ Do not leave the machine’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
„ Do not open the machine during printing.
„ Do not tap media stacks on the machine.
„ Do not lubricate or disassemble the machine.
„ Do not tilt the machine.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the machine and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked too
high, your machine may experience media misfeeds and excessive media
curl.
„ When lifting the machine, grasp the
areas shown in the figure.
Keep the machine level to avoid
toner spillage.
„ Before moving the machine, remove
the dust cover, and fold up Tray 1.
„ If the optional lower feeder unit,
attachment and duplex option are
installed, remove them and move
them separately.
„ If you get toner on your skin, wash it
off with cool water and a mild soap.
CAUTION!
If you get toner in your eyes, wash it out immediately with cool water and
consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you plug in
the machine.
21kg
46 lbs