One for All URC-7541 - Manual (Page 7)

W W W.ONEFORALL.COM
5
Function
Device Keys
The TV, VCR, SAT and AUX keys select the home
entertainment device to be controlled. For example
pressing the TV key allows the remote to control the
functions of your Television, after pressing VCR you
can operate your Video Recorder or DVD Player and
the SAT key operates your Satellite Receiver or Cable
Converter. The AUX key only operates a second
Television, Video Recorder or DVD Player, Satellite
Receiver or Cable Converter. During operation of the
ONE FOR ALL the device key will light up to indicate
the mode you are using.
Channel, Volume Keys
The CHANNEL and VOLUME keys control the two
most frequently used functions of your device. They
operate just as those on your original remote.
Mute Key
The MUTE key operates the same function as it did
on your orginal remote control. It is also used to
activate the SCAN feature (see page 24).
Directional Keys
These keys will allow you to navigate
through the MENU of your device.
Exit
The EXIT key will exit the MENU.
OK
The OK key will confirm your choice in
MENU operation.
Number Keys
The Number keys (0-9, 10, AV(20)) provide direct
access functions just like your original remote, such
as channel selection. If your original remote uses
one/two digit input switching (
-/-- symbol), this
function can be obtained by pressing the -/-- key,
which is the same as the 10 key. If your original
remote has a 20 key, this function can also be found
under the AV key.
Video Recorder Keys
After pressing the VCR key, the Video Recorder keys
operate the functions of your Video Recorder. To
prevent accidental recording, the RECORD key must
be pressed twice to start recording.
The SP/LP key controls the tape speed
function, the AUTO key controls the auto tracking
function just like on your original remote.
The Keypad
-/-- -/--
ch
+
EXIT
OK
vol
MUTE
MUTE
EXIT
20
OK
SP/LP AUTO
MUTE