One for All URC-7541 - Manual (Page 32)

30
W W W.ONEFORALL.COM
Trouble-Shooting
Problem:
Your brand is not listed
in the code section?
The ONE FOR ALL does
not operate your
device(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video not recording?
The ONE FOR ALL does
not respond after
pressing a key?
Device key does not
blink when you press a
key?
Solution:
Try the search method on
page 9.
A) Try all the codes listed for your
brand. B) Try the search method on
page 9.
You may be using the wrong code.
Try repeating the Direct Set-Up
using another code listed under
your brand or start the search
method over again to locate the
proper code.
Enter the channel number exactly as
you would on your original remote.
As a safety feature on your ONE FOR
ALL, you must press the RECORD key
twice.
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
Replace batteries with 2 fresh, new
“AA/LR6” alkaline batteries.
Helpful Hints