One for All URC-7541 - Manual (Page 12)

10
W W W.ONEFORALL.COM
After you have used the Search Method, you can find out which code
the ONE FOR ALL responded to by blinking back the code. It is useful
to know your code for future reference. Remember, you can only
blink back your code after the ONE FOR ALL is operating your
device.
Example: to blink out your Television code:
Press TV once.
Press and hold MAGIC until the device key
blinks twice.
Press 9 9 0. The device key will blink twice.
For the first digit of your four-digit code, press 1
and count all the red blinks.
If there are no blinks, the digit is "0".
For the second digit, press 2 and count all the red
blinks. If there are no blinks, the digit is "0".
For the third digit, press 3 and count all the red
blinks. If there are no blinks, the digit is "0".
For the fourth digit, press 4 and count all the red
blinks. If there are no blinks, the digit is "0". Now
you have your four-digit code.
Make sure you write down your device code in the boxes
provided in the battery compartment and on page 11 for easy
future reference.
Installation
6
4
5
1
2
3
Important note: To blink back the code for your Video Recorder or DVD
Player, Satellite or Cable converter, follow the instructions above only press
VCR or SAT during step 1.
7