Oki B2500 Series - Manual (Page 32)

B2520 / B2540
- 27 -
6 - Parameters/Setup
Printing the functions guide
51 - PRINT / FUNCTIONS LIST
1 Press on and enter 51 with the digital keypad.
The printing of the functions guide starts.
74 - Erase mailbox When the fax machine receives an
e-mail with an attachment and
cannot open it, it erases the
message from the ISP MBX, prints
and transmits with a notice of
uncomprehension to the message
sender.
At E-mail reception, the fax does
not destroy the MBX message, it
prints a notice of uncomprehension
asking you to recuperate this
message with your computer
equipment.
This parameter is useful only if you
have PC equipment. The memory
capacity is limited, you need to
empty your MBX or else new
messages may not be received.
75 - Text Attchmt. Editing YES / NO and printing the
received Internet documents.
76 - Attchmt format Default format of document sent on
the Internet:
PDF : monochrome or colour
IMAGE : monochrome (TIFF) or
colour (JPEG)
77 - LAN speed To define the communication
speed of the peripheral units in
relation to the implemented Local
Area Network (LAN).
80 - Toner save Makes printing lighter to save toner
cartridge ink.
81Font number Starts the printing of the log list.
This parameter lets you set the
default PCL font. The possible
values are included between 5 and
128 inclus. The default value is 0
(Courier).
82 Form lines This parameter lets you set the
number of lines per page.
This variable is linked to the PJL
variables: PAPER and
ORIENTATION. If you modify one
of these variables, the Form Lines
variable is automatically updated
(only for the print job in progress) to
respect the same spacing.
The possible values are included
between 5 and 128 inclus. The
default value is 60.
83 Font pitch This parameter lets you set the
default font spacing, in characters
per inch (the default font must be of
type non-proportional).
The possible values are included
between 0,44 and 99,99 inclus.
The default value is 10,00.
Parameter Signification
84 Ptsize This parameter lets you set the
default font height, in points (the
default font must be of type
proportional).
The possible values are included
between 4,00 and 999,75 (by step
of 0,25). The default value is 12,00.
85 Line termin. This parameter lets you define line
breaks conversion: ,
and .
The possible values are included
between 0 and 3. The default value
is 0.
86 Orientation This parameter lets you set the
page orientation: portrait or
landscape. The default value is
"portrait".
90 - RAW Port RAW network print port connection.
91 - Printer error
timeout Time-out before document being
printed is deleted following a print
error in PC print mode.
92 - Printer wait
timeout Wait time-out for data from PC
before the task is deleted in PC
print.
93 - Replace format Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
94 - Printer class Printing in PCL-/Postscript Mode
Printing in GDI mode
95 Symbol set This parameter lets you set the
default character set. The possible
values are included between CS1
and CS30 inclus. The default value
is CS1 (Roman8).
96 - NBR. WEP
Keys Number of WEP keys allowed
(from 1 to 4).
The printing is not possible on A5 paper
format.
Parameter Signification