Onkyo AV RECEIVER HT-RC460 - Manual (Page 71)

Controlling Other Components
En-71
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
INPUT MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
` 33101:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the
*1
(limited to some models). The component must be able to
receive remote control commands via
and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
` 32910/33101/33501/31612:
Blu-ray Disc/DVD player with
*1 The supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ TV operation
■ Blu-ray Disc player / HD DVD player operation
Press the appropriate REMOTE
MODE button first.
Available buttons
, INPUT, TV VOL / ,
MUTING
Number: 1 to 9, 0
Number: +10 *1
GUIDE DISPLAY
/ //
ENTER
CH +/–
PREV CH
SETUP RETURN
, , , , ,
, *1
AUDIO *1
CLR
A (Red) *1
B (Green) *1
C (Yellow) *1
D (Blue) *1
Available buttons
TOP MENU SOURCE
/ //
ENTER
DISPLAY
MUTING
SETUP CH +/–
, , , , ,
,
DISC +/–
MENU
A (Red) RETURN
B (Green) AUDIO *1
C (Yellow) CLR
D (Blue)
Number: 1 to 9, 0
Number: +10 *1