Controlling other components, Preprogrammed remote control codes, Looking up for remote control codes – Onkyo AV RECEIVER HT-RC460 User Manual
Page 68: Step 5 of “looking up for remote control codes
Controlling Other Components
En-68
Controlling Other
Components
You can use the AV receiver’s remote controller to control
your other AV components. This section explains how to
enter the remote control code for a component that you
want to control: DVD, TV, CD, etc.
The following REMOTE MODE buttons are
preprogrammed with remote control codes for controlling
the components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
indicated pages.
You can look up for an appropriate remote control code
from the on-screen menu.
Note
• This can only be carried out using the on-screen menu.
Preprogrammed Remote Control
Codes
BD/DVD Onkyo Blu-ray Disc player (
TV/CD
Onkyo CD player (
)
Looking up for Remote Control Codes
1
Press
RECEIVER followed by HOME.
2
Use /
to select “Setup”, and then press
ENTER.
3
Use / to select “Remote Controller Setup”, and
then press
ENTER.
4
Use / to select “Remote Mode Setup”, and then
press
ENTER.
5
Use / to select a remote mode, and then press
ENTER.
The menu of category selection appears.
6
Use / to select a category, and then press
ENTER.
The keyboard screen for brand name input appears.
7
Use / /
/
to select a character, and then press
ENTER.
Repeat this step for the first three characters of the
brand name.
When you have entered the 3rd character, select
“Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use
to select “Not Listed”, and then press
ENTER.
The keyboard screen for brand name input appears.
8
Use / to select a brand, and then press
ENTER.
A remote control code with its instructions are
displayed. Follow the procedure.
9
If you can control the component, use / to select
“OK”, and then press
ENTER.
The on-screen menu returns to the “Remote Mode
Setup” front screen.
If you cannot control the component, use / to
select “Try Next Code” and press
ENTER.
The next code is displayed.